ABB EntelliGuard AKD-5 Installation Manual page 23

Figure 13. Legacy Indicator Assembly
5. Slide the bracket (Figure
6. Line up the guiding holes
Figure 15. Slide Bracket Up
7. Mark the bottom two holes using the bracket as a template.
8. Take the bracket out and drill 0.18-in diameter pilot holes in the frame.
21 EntelliGuard R Circuit Breaker Retrofill AKD-5 Installation Manual
14) up to its fixing location as shown in the illustration
(Figure 16).
Figure 16. Line Up Holes
Figure 14. Bracket Template for
Drilling Holes
(Figure
DEH-41547
15).