19. If the circuit breaker is ON and the springs are charged, to turn the breaker off, press the OPEN
button on the circuit breaker fascia and ensure the circuit breaker contacts are open.
Figure 36. Breaker Ready for Complete Installation
20. Remove the racking tool
21. Extend the racking tool to create a cranking device.
Figure 37. Racking Tool
22.
Figure 38
shows the racking tool extended.
31 EntelliGuard R Circuit Breaker Retrofill AKD-5 Installation Manual
(Figure
37) from the storage location on the cassette right front panel.
DEH-41547