Chapter 6 - Correction And Calibration; Sensor Offset - Honeywell TR50 User Manual

CHAPTER CHAPTER
6 6
CORRECTION AND CALIBRATION
This chapter provide TR50 sensor offset functionality and sensor calibration
information.

6.1 Sensor Offset

The sensor offsets allow the user to fine tune each sensor reading to match their
known good instrument reading.
TR50 provide the following sensor offset configuration items,
#
TR50 - User Guide
Configuration Items
1 cfgTempSensorOffset
2 cfgHumiSensorOffset
3 cfgPM2.5SensorOffset
4 cfgPM1.0SensorOffset
5 cfgPM10SensorOffset
6 cfgTVOCSensorOffset
Comments
Offset for temperature sensor, this value will be
added to the sensor chip raw value within TR50
device itself, than TR50 will provide the final value.
Offset for humidity sensor, this value will be added to
the sensor chip raw value within TR50 device itself,
than TR50 will provide the final value.
Offset for PM2.5 sensor, this value will be added to
the sensor chip raw value within TR50 device itself,
than TR50 will provide the final value.
Offset for PM1 sensor, this value will be added to the
sensor chip raw value within TR50 device itself, than
TR50 will provide the final value.
Offset for PM10 sensor, this value will be added to
the sensor chip raw value within TR50 device itself,
than TR50 will provide the final value.
Offset for TVOC sensor, this value will be added to
the sensor chip raw value within TR50 device itself,
than TR50 will provide the final value.
73