Table of Contents
Advertisement
HP-IB INTERFACE/26067B
1 -1.
INTRODUCTION
This
manual
provides
general
information,
installation, theory, and service information
for
the
Hewlett-Packard
HP-IB
Interface
(part
number 5062-0477).
This section includes a general description and
specifications for the interface.
1-
2. GENERAL DESCRIPTION
The HP-IB Interface (5062-0477)
enables a user
to operate an HP 256X Line Printer
on the
Hewlett-Packard
Interface Bus (HP-IB).
The HP-IB interface consists of a single printed
circuit assembly (PCA) part number 5062-0477
which is installed into the printer backplane I/O
Section I
General Information
connector.
The interface
is available either as
the factory installed standard printer interface
or as a kit for field installation.
The 26067B
HP-IB
Interface
Kit
provides
the
HP-IB
Interface PCA (5062-0477)
for field installation.
The kit also includes this manual (part number
26067-90901)
and a 4 metre cable.
The HP-IB Interface is designed for operation in
the HP 256X Line Printer; thus, the interface
electrical specifications conform to the printer
specifications. Printer specifications are provided
in the 256X Printer
Operator's Manuals (part
numbers
02563-90901,
02564-90901
and
02566-90901).
General specifications for the interface are listed
in table 1-1.
TABLE 1-1. SPECIFICATIONS
*Electrical Characteristics
POWER REQUIRED:
+12 Volts +/- 5%
@
50 ma max. + 5 Volts +/- 5%
@
1500 ma max.
All power is supplied by the printer through the backplane connector to the interface
PCA.
*Mechanical Characteristics
SIZE: 13.8cm (5.4 in.) by 27.3 em (10.8 in.)
*Environmental Specifications
OPERATING TEMP: 0 to 55 Degrees C (32 to 131 Degrees
F)
RELATIVE HUMIDITY: 10%to 90%
@
40 Degrees C
1-1
Advertisement
Table of Contents
