Miele HS19 Operating Instructions Manual page 56

en - Warning and Safety instructions
If you are using a mains plug adapter, make sure that it is

approved for continuous operation.
Temporary or permanent operation on an autonomous

power supply system or a power supply system that is not
synchronised with the mains power supply (e.g. island net-
works, back-up systems) is possible. A prerequisite for op-
eration is that the power supply system complies with the
specifications of EN 50160 or an equivalent standard.
The function and operation of the protective measures
provided in the domestic electrical installation and in this
Miele product must also be maintained in isolated opera-
tion or in operation that is not synchronised with the mains
power supply, or these measures must be replaced by
equivalent measures in the installation. As described, for
example, in the current version of BS OHSAS 18001–2
ISO 45001.
Charge and use the AP01/AP02/AP03 battery at an am-

bient temperature between 0 °C and 45 °C.
Using the AP01/AP02/AP03 battery outside of this ambi-
ent temperature range will limit its performance.
Stop using the AP01/AP02/AP03 battery immediately if

you notice an unusual smell from it, if liquid is leaking from
it, if it is significantly overheating or if it is discoloured or
deformed. Dispose of the AP01/AP02/AP03 battery im-
mediately (see safety note "Disposing of the AP01/AP02/
AP03 battery" at the end of the following section "Correct
use" as well as "Caring for the environment" – "Disposing
of old batteries").
56