Electrical Connection For The Uk - Miele HS19 Operating Instructions Manual

en
Hose extension (HX-FSH 10)
For increasing the vacuuming radius by
maximum 120 cm.
AP01/AP02/AP03 additional battery
(HX LA)
For doubling the amount of time the va-
cuum cleaner can be used for.
Before charging for the first time, you
must read the information in "Installa-
tion and connection" – "General bat-
tery information".
LS03/LS04 (HX LS) charger cradle
For charging the additional battery inde-
pendently of the appliance, i.e. while the
appliance is in use.
Before charging for the first time, you
must read the information in "Installa-
tion and connection – General battery
information".
Fine dust filter (HX FSF-2)
To continue achieving the best possible
cleaning results, replace the fine dust fil-
ter that is fitted as standard with a new
one after approx. 3 years (see "Mainten-
ance – Cleaning the pre-filter and fine
dust filter").
78
Electrical connection for
the UK
All electrical work should be carried out
by a suitably qualified and competent
person in strict accordance with current
national and local safety regulations (BS
7671 in the UK). The voltage and fre-
quency are given on the data plate loc-
ated underneath the vacuum cleaner.
Please ensure that these match the
household mains supply. The fuse rating
is quoted on the plug. The appliance is
supplied with a cable and moulded plug
ready for connection to a 230-240 V/
50 Hz a.c. single phase supply.