To copy raw measurement data
Set up the module for the measurement you want to make, and run
1
the analyzer to acquire data.
You can do this from the HP 16500B's X Window interface or front panel, or
by programming the HP 16500B.
Access the HP 16500B's file system.
2
Refer to the "Accessing the HP 16500B File System" chapter.
Copy the data.raw file from the appropriate \slot_{x} directory.
3
Raw measurement data files are binary format files that can be transferred to
your computer and then reloaded into the HP 16500B system later.
The data.raw file is overwritten each time new data is acquired.
Retrieving and Restoring Measurement Data
To copy raw measurement data
3-5