Table of Contents
Advertisement
Programming the HP 16500B
To copy commands to \system\program
Example
Suppose an HP 16550A state/timing analyzer is installed in slot C (slot 3) of
your HP 16500B mainframe. To clear the format and trigger set-ups on the
HP 16550A, first type the following commands into an ASCII text file.
File clear.txt:
:SELECT 3
:MACHINE1:SFORMAT:REMOVE ALL
:MACHINE1:STRIGGER:CLEAR ALL
The first command selects the state/timing analyzer in slot C to receive
programming commands. The second command clears the format set-up.
The third command clears the trigger set-up.
Now copy the file to the HP 16500B system. At the MS-DOS prompt, enter:
copy clear.txt L:\system\program
If your computer runs the UNIX operating system, you might use the cp
command. In an MS Windows environment, you can use File Manager.
5-8
Advertisement
Table of Contents
