Related Manuals for Philips 75BDL8051C
Summary of Contents for Philips 75BDL8051C
- Page 1 Professional Display Solutions C Line 75BDL8051C 86BDL8051C User Manual (English) www.philips.com/welcome...
- Page 2 • When turning off the display by detaching the power cord, wait 6 seconds before re-attaching the power cord for normal operation. • Ensure the use of an approved power cord provided by Philips at all times. If your power cord is missing, please contact your local service center.
- Page 3 75BDL8051C/86BDL8051C If your display does not operate normally, having followed the instructions set out in this document, please contact a technician or your local service center. Stability Hazard The device may fall, causing serious personal injury or death. To prevent injury, this device must be securely attached to the floor/wall in accordance with the installation instructions.
- Page 4 75BDL8051C/86BDL8051C Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Use only an RF shielded cable that was supplied with the display when connecting this display to a computer device.
- Page 5 75BDL8051C/86BDL8051C équipement doit être installé et utilisé avec un minimum de 20cm de distance entre la source de rayonnement et votre corps. Canada: Industry Canada statement: This device complies with RSS-247 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- Page 6 75BDL8051C/86BDL8051C 4. We confirm that if its products are handled properly for their intended use, they are safe to use according to scientific evidence available today. 5. We play an active role in the development of international EMF and safety standards, enabling us to anticipate further developments in standardization for early integration in its products.
- Page 7 75BDL8051C/86BDL8051C Placering/Ventilation ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE. Paikka/Ilmankierto VAROITUS: SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA. Plassering/Ventilasjon ADVARSEL: NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE FOR STØMTILFØRSEL ER LETTE Å NÅ.
- Page 8 Please find out about the local regulations on how to dispose of your old display from your local Philips dealer. (For customers in Canada and U.S.A.) This product may contain lead and/or mercury.
- Page 9 75BDL8051C/86BDL8051C Batteries For EU: The crossed-out wheeled bin implies that used batteries should not be put to the general household waste! There is a separate collection system for used batteries, to allow proper treatment and recycling in accordance with legislation.
-
Page 10: Table Of Contents
75BDL8051C/86BDL8051C Table Of Contents OSD Menu ................24 5.1. Navigating the OSD Menu ..........24 5.1.1. Navigating the OSD menu using the Unpacking and Installation ........1 remote control............24 1.1. Transportation and Unpacking..........1 5.1.2. Navigating the OSD menu using the 1.2. - Page 11 75BDL8051C/86BDL8051C 11.2. Troubleshooting .................65 12. Technical Specifications ............67 Appendix Warranty Statement ............71...
-
Page 12: Unpacking And Installation
75BDL8051C/86BDL8051C Unpacking and Installation 1.1. Transportation and Unpacking Notice for transportation • Always keep the carton in a vertical position. • Do NOT apply shock/vibration to the product. Do NOT place the carton in any other direction. • Do NOT place heavy objects on top of the • Do NOT drop the product. - Page 13 75BDL8051C/86BDL8051C Notice for transportation 1. Remove the strap around the carton. 2. Use a blade to cut the tape on the top and open the carton. 3. Take out the cushions carefully. 4. Remove the plastic carton lockers and the top carton.
- Page 14 75BDL8051C/86BDL8051C 5. Take the display out of the carton box by two adults with both hands. • Do not touch the screen of display to avoid • Keep the display vertically when moving it. possible scratches. Move the display by holding the handles.
-
Page 15: Package Contents
• HDMI transmitter x2 Power Cable RS232 Cable RS232 Daisy Chain Cable IR Sensor Cable • USB Cover x1 • Cleaning cloth x1 • Philips logo plate x1 HDMI Cable USB A-B Cable Touch Pen HDMI transmitter DVI Cable • M3 screw x2 • M2 screw x2... -
Page 16: Mounting On A Wall
5. 75BDL8051C: Weight of the unit without base=TBD kg. The equipment and its associated mounting facilities still remain secure during the test. Use only the UL listed Wall Mount Bracket with a minimum weight/load of TBD kg. -
Page 17: Parts And Functions
75BDL8051C/86BDL8051C Parts and Functions 2.1. Control Panel Remote control sensor and power status indicator ] button • Receive command signals from the remote control. Turn the display On or turn the display to standby mode. • Indicate the operating status of the display without... -
Page 18: Input/Output Terminals
75BDL8051C/86BDL8051C 2.2. Input/Output Terminals 10 11 12 AC OUT RS232 IN / RS232 OUT AC power supply to the AC IN jack of a media player. Android RS232 network input/output is reserved for customized protocol usage from System Integrator. MAIN POWER SWITCH... -
Page 19: Inserting The Batteries In The Remote Control
75BDL8051C/86BDL8051C 2.2.1. Inserting the batteries in the remote control The remote control is powered by two 1.5V AAA batteries. To install or replace the batteries: 1. Press and then slide the cover to open it. 2. Insert the batteries with the correct polarity (+) and (–). -
Page 20: Remote Control
75BDL8051C/86BDL8051C 2.3. Remote Control NAVIGATION buttons 2.3.1. General functions Root Menu: Go to the OSD of Smart picture. Main Menu: Move the selected item up to make adjustment. IR Daisy Chain Menu: Increase the controlled Group ID number. Root Menu: Go to the OSD of Audio source. -
Page 21: Id Remote Control
75BDL8051C/86BDL8051C 2.3.2. ID Remote Control Press the [ID] button and the red LED blinks twice. 1. Press [ID SET] button for more than 1 second to enter the Set remote control ID number when using several displays. ID Mode. The red LED lights up. -
Page 22: Remote Control Buttons On Android
4. When playing a PDF, video or music file, you can press ] button to pause playing. 5. All media or PDF files should be located in the folder of “philips”, under the root directory of the specified storage (internal/USB/SD Card). All sub-folders (video/ photo/music/pdf) are named by media types and shouldn’t be changed. - Page 23 75BDL8051C/86BDL8051C ] button Confirm an entry or selection. [ ] ADJUST button 1. In the content of the web page, move the focus down to the next selectable items. 2. Move the focus down to the next control or widget such as buttons.
-
Page 24: Usb Cover
75BDL8051C/86BDL8051C 2.4. USB Cover ■ Plug in the USB device and insert the micro SD card. ■ Use the screw provided to fix the USB cover. Maximum suitable USB stick size: 20(W)x10(H)x80(L) mm... -
Page 25: Module
75BDL8051C/86BDL8051C 2.5. 4G Module 1. Please consult a professional technician to install the 4G module. 2. Power off the display. 3. Install the 4G module, fix it by using the M2 screws on accessory if necessary. 4. Connect the antenna to the 4G module. -
Page 26: Connecting External Equipment
75BDL8051C/86BDL8051C Connecting External Equipment 3.1. Connecting External Equipment (DVD/VCR/VCD) 3.1.1. Using HDMI video input DVD / VCR / VCD HDMI Out HDMI1 IN HDMI2 IN [HDMI IN] 3.2. Connecting a PC 3.2.1. Using DVI input [VGA AUDIO IN] Audio Out... -
Page 27: Connecting Audio Equipment
75BDL8051C/86BDL8051C 3.3. Connecting Audio Equipment 3.3.1. Connecting an external audio device Audio In [AUDIO OUT] SPEAKER SWITCH AUDIO OUT Stereo Amplifier AUDIO IN 3.4. Connecting Multiple Displays in a Daisy-chain Configuration You can interconnect multiple displays to create a daisy-chain configuration for applications such as a menu board. -
Page 28: Ir Connection
75BDL8051C/86BDL8051C 3.5. IR connection External IR Receiver DISPLAY 1 DISPLAY 2 [IR IN] [IR IN] [IR OUT] DISPLAY 1 DISPLAY 2 [RS-232 OUT] [RS-232 IN] NOTE: 1. The remote control sensor of this display will stop working if the [IR IN] is connected. -
Page 29: Touch Operation
75BDL8051C/86BDL8051C 3.7. Touch Operation Zoom in This display is equipped with a touch-sensitive screen and Touch the target on the screen with two fingertips holded supports the Windows Touch features either by singletouch together and move them apart to zoom in (magnify) the or multitouch operation. - Page 30 75BDL8051C/86BDL8051C Touch function supports 10 touch points. The OS supported is listed below: Item Description Operating Systems Supported Windows 7, 8/8.1, 10 by Plug-and-Play Single Touch Passive Pen Supported Modes of Windows 7, 8/8.1, 10 Operation by the Operating Mac OSX System Android 6.0: Up to Android 6.0...
-
Page 31: Operation
75BDL8051C/86BDL8051C Operation Every week: ■ Set a weekly schedule. NOTE: The control button described in this section is mainly on the remote control unless specified otherwise. Save: ■ Save the schedule. 4.1. Watch the Connected Video Source 1. Press the [ ] SOURCE button. - Page 32 75BDL8051C/86BDL8051C All media files should be placed in /philips/ of root directory. For example, videos in /philips/video/ photos in /philips/photo/ music in /philips/music/ b a r . 7.1 In the slidebar, the following functions are available: - Select all: select all storage files.
- Page 33 75BDL8051C/86BDL8051C 9. After selecting the desired file, press “Info” key to get detailed information. 10. After selecting the desired file, press “Play” key to play the media file immediately. 11. If you created a playlist with all image files, you will be asked to add a background music to the slideshow before saving.
-
Page 34: Side Bar
Content : NOTE: If the playlist contains video and music files, the screen becomes black when playing music file. Step 2. Copy “mpplaylistX.txt” to “philips” folder of internal storage. You may use FTP to do this. File path : /storage/emulated/legacy/philips (for DL, PL) Ex. -
Page 35: Osd Menu
75BDL8051C/86BDL8051C OSD Menu 5.2. OSD Menu Overview An overview of the On-Screen Display (OSD) structure 5.2.1. Picture menu is shown below. You can use it as a reference for further adjustment of your display. 5.1. Navigating the OSD Menu 5.1.1. Navigating the OSD menu using the... -
Page 36: Screen Menu
75BDL8051C/86BDL8051C The options are: {3000K} / {4000K} / {5000K} / {6500K} / 21:9 {7500K} / {9300K} / {10000K} / {Native} / {User 1} / {User 2}. The picture is enlarged to 21:9 format. This mode is recommended Color control when displaying pictures that have... -
Page 37: Configuration Menu
75BDL8051C/86BDL8051C Treble • {Power off} - The display will remain off when the power cord is connected to a wall outlet. Adjust to increase or decrease higher-pitched sounds. • {Forced on} - The display will turn on when the power Bass cord is connected to a wall outlet. -
Page 38: Advanced Menu
75BDL8051C/86BDL8051C Monitor ID Press [ ] or [ ] button to select [Reset], and then press [RESET] button to do the reset. Set the ID number for controlling the display via the RS232C connection. System will be in media player mode after factory reset. - Page 39 75BDL8051C/86BDL8051C Off Timer HDMI with One Wire Set automatic power off time (in hours). CEC control. • {Off} - Disable CEC.(Default) Schedule • {On} - Enable CEC. 1. Default start time and end time are 00:00. The following features are supported: 2.
-
Page 40: Android Settings
75BDL8051C/86BDL8051C Power Save 1. Press [SET] or [ ] button to enter the submenu. 2. Press [ ] or [ ] button to select {Reset} and press the Mode 1 [TCP off, WOL on, auto off] [SET] button to restore settings to factory preset values. - Page 41 75BDL8051C/86BDL8051C 5.2.6.2.1. General Settings Settings -> Signage Display -> General Settings Set up Signage Display name, User logo and Screenshot. Signage display name Settings -> Signage Display -> General Settings -> Signage Display Name Set up Signage Display name, the default name is Ethernet MAC address with prefix “PD_”.
-
Page 42: Imd Suite
75BDL8051C/86BDL8051C IMD Suite 6.1. IMD Suite Windows User FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. - Page 43 75BDL8051C/86BDL8051C Once you have completed the setup of the Conferencing button, you can access it from the dashboard. When no conferencing applications are configured and you click the conference button, the settings will open so you can set your conference button.
-
Page 44: Whiteboard
75BDL8051C/86BDL8051C 6.3. Whiteboard The whiteboard button enables users to take notes on a blank canvas (whiteboard) in just one click. When a user clicks the “Whiteboard” button, the application MS Whiteboard will open. Whiteboard button configurations The whiteboard button can be configured in the settings where either MS Whiteboard. Also here you can select “custom application”... -
Page 45: Present
75BDL8051C/86BDL8051C - You will be prompted to place the link on the desktop, click yes to continue 6.4. Present The Present button lets users share content wirelessly from their device. Start sharing your screen at the push of a button by clicking on ‘present’. The screen mirroring application “IMD-Sync” is pre- installed on the IMD Suite OPS. -
Page 46: Co-Create
75BDL8051C/86BDL8051C 6.5. Co-Create Co-create allows users to instantly link with other interactive whiteboards and PCs for the ultimate real-time collaboration experience using the MS Teams application or any other application of choice. “Co-Create” button configurations The Co-create button can be configured in the settings where either Teams or custom application can be selected. -
Page 47: Windows Logout/Lock
75BDL8051C/86BDL8051C 6.6. Windows logout/lock This feature displays the logged in Windows user’s details (name and image) on the home screen. The design and position of this feature depends on the type of layout you are using. Windows User Configuration Open the settings to adjust Windows user display. -
Page 48: Bookmarks
75BDL8051C/86BDL8051C 6.7. Bookmarks Add an unlimited number of bookmarks for instant access. Bookmarks can be files, folders or web links and can be configured using the settings. NOTE: Web links will be opened with your default browser. Configure bookmarks on the dashboard 1. -
Page 49: Floating Home Button
75BDL8051C/86BDL8051C 6.8. Floating Home Button The IMD Launcher contains a floating Home button which always floats on top to your applications. Pushing this button will always return you to the Launcher/home screen. This floating home button can be dragged to any location on the screen to avoid that it conflicts with other content on the display. -
Page 50: Customize Your Launcher
75BDL8051C/86BDL8051C 6.9. Customize your launcher Your settings security If you don’t want users to be able to change the look and feel of your launcher, then set an admin password when opening the settings. After setting your password, a pop up window will appear when a user will open the settings. - Page 51 75BDL8051C/86BDL8051C Vertical or horizontal dark/light Choose to sort your buttons horizontal or vertical and choose if you would like to have dark or ligth buttons. When you choose for ‘vertical’, the buttons and columns will be sorted vertically. When choosing for the horizontal layout, then of course the buttons are sorted horizontally.
- Page 52 75BDL8051C/86BDL8051C Font size The font size is automatically adjusted based on your screen resolution, but it can also be adjusted manually in the settings. Just drag the slider to change the font size, as see the live preview of changes. Then click “confirm”.
- Page 53 75BDL8051C/86BDL8051C A video background can be used as well, however, a codec pack such as K-Lite (https://www.codecguide.com/download_ kl.htm) is required on your machine. Acceptable videos formats: MP4. The background video is scaled to the screen resolution (up or down) without keeping the original proportions.
-
Page 54: Password
75BDL8051C/86BDL8051C 6.10. Password Password Configurations To change the password for the settings, open the settings, navigate to the tab ‘account’ and go to the section ‘enable admin password’ to set your password. Slide the orange toggle to turn the password lock on or off. -
Page 55: Calendar
75BDL8051C/86BDL8051C 6.11. Calendar This feature lets users connect their Office 365 mail account to display current meetings/calendar on the Launcher dashboard. Configure Calendar Widget Login to the Admin panel, nagivate to the ‘widgets’ tab and go to the Calendar section. - Page 56 75BDL8051C/86BDL8051C Weather The city, for which the weather will be displayed, should be entered by the user via the settings. Country code (e.g. “fr”, “de”, “us”) is optional but it helps to avoid the issue with cities which have the same name in different countries.
-
Page 57: Imd Launcher Updates
75BDL8051C/86BDL8051C Exporting these settings, allows you to import your customised settings. The export file is in the “Documents” folder on your local device. Import the settings simply by double clicking on the file in the Launcher folder. 6.13. IMD Launcher updates Updates will be detected automatically (if server connection is available). -
Page 58: Imd Sync
75BDL8051C/86BDL8051C IMD Sync Activate the IMD R-Sync app Wired pairing: 1. Make sure that your Receiver is connected properly with your interactive display. 2. Turn on your receiver. 3. Insert the USB of the IMD Sync transmitter into the ‘USB IN’ port of the Receiver . - Page 59 75BDL8051C/86BDL8051C 7. Now we’re in the “Pairing Data Settings”-screen, here a Wi-Fi password is needed. When the WiFi doesn’t have a password, then just press “Pairing” 8. The system will ask permission to access the USB device for the first pairing, provide permission and select “ok”...
-
Page 60: How To Use Your Presenting Solution
75BDL8051C/86BDL8051C 7.1. How to use your presenting solution 7.1.1. Usage of the Receiver 7.1.1.1. IMD R-Sync User Interface When you see the screen below, the IMD Sync receiver is ready to start screen mirroring. Choose in the sidebar which operating system you are using as transmitter to start the screen sharing on with your IMD R-Sync. - Page 61 75BDL8051C/86BDL8051C 7.1.1.2. Action Short Cut on the touch panel 0179 Press the to expand the floating circle menu. Press the center of the floating menu again to close it. Unlock/lock menu. Enable/Disable Back Control from receiver to control the Windows / Mac clients.
- Page 62 75BDL8051C/86BDL8051C 7.1.1.3. Basic Mode and Conference Mode Multi-screens in Conference Mode The meeting host as an admin who can select which screen to share and join in the split screens. Click on the highlighted multi-screen icon to let the screen preview bar show up. Or move the mouse cursor or swipe on the touch panel from the left/right side to edge.
- Page 63 75BDL8051C/86BDL8051C You have to restart the IMD R-Sync to apply the changed settings. Restarting can be done after pressing the ‘Apply’ button in de right-bottom corner of the settings screen. Software It will be identical to the Windows Computer Name. Editable for customized name for the receiver, and Server Name only effective to the clients’...
- Page 64 75BDL8051C/86BDL8051C Hotspot mode: click on hotspot if you would like to use your device via its available hotspot mode. More settings...
-
Page 65: How To Start Screen Mirroring
75BDL8051C/86BDL8051C 7.2. How to start screen mirroring? The user has the option to choose between a software and hardware transmitter. The software transmitter can be downloaded from the website. Please refer to our existing manual if you would like to start screen sharing in com- bination with the: •... -
Page 66: Troubleshooting
75BDL8051C/86BDL8051C 7.4. Troubleshooting Screen mirroring with my IMD Sync Android transmitter software doesn’t work. Please turn of your 4G before you start the screen sharing. This is a bug at Android and can’t be fixed. Troubles with the license of the IMD Sync Receiver? What can you do: •... - Page 67 75BDL8051C/86BDL8051C Now click the lock icon to unlock it, then choose “allow”...
- Page 68 75BDL8051C/86BDL8051C Mac permission settings How to turn on permissions if I didn’t allow permission when I installed the software? Go to “system preferences” Choose the tab “general” and click the lock icon to unlock it, then choose “allow” No sound with macOS software transmitter Please contact our service team.
-
Page 69: Supported Media Formats
75BDL8051C/86BDL8051C Supported Media Formats USB Multimedia Codec Formats Video Decode Type Video Codec Container Decode Encode Channel Remark MPEG program stream (.DAT, .VOB, .MPG, .MPEG) MPEG transport stream (.ts) Max Resolution: 1080P@60fps MPEG1/2 MPEG1/2 MP4 (.mp4) Max Bit Rats : 40Mbps AVI (.avi) - Page 70 75BDL8051C/86BDL8051C Image Decode Type Image Codec Photo Decode Encode Channel Remark Max Resolution: 7000 x 7000 JPEG JFIF file format 1.02 File Format: JPG, JPEG The limitation of max resolution depends on DRAM Max Resolution: 15360 x 8640 File Format: BMP...
-
Page 71: Input Mode
75BDL8051C/86BDL8051C Input Mode VGA/DVI timing support: Item Mode Resolution H.Freq. (KHz) V.Freq. (Hz) IBM VGA 10H 640x350 31.469 70.086 IBM VGA 12H 640x480 31.469 59.94 MACINTOSH 640x480 66.67 VESA 640x480 37.861 72.809 VESA 640x480 37.5 IBM VGA 3H 720x400 31.469 70.087... - Page 72 75BDL8051C/86BDL8051C 4K2K Item Resolution H.Freq. (KHz) V.Freq. (Hz) 3840x2160 53.946 23.900 3840x2160 24.000 3840x2160 56.25 25.000 3840x2160 67.432 29.900 3840x2160 67.5 30.000 3840x2160 112.5 50.000 3840x2160 60.000 Video Timing support(HDMI/DVD HD/DVI) Item Mode Resolution Comment 60Hz 480i except DVI 480p...
-
Page 73: Pixel Defect Policy
However, pixel or sub-pixel defects on the PDP / TFT panels used in Plasma- & LCD- displays are sometimes unavoidable. No manufacturer can guarantee that all panels will be free from pixel defects, but Philips guarantees that any Plasma- &... -
Page 74: Dark Dot Defects
10.6. Pixel Defect Tolerances In order to qualify for repair due to pixel defects during the warranty period, a PDP / TFT panel in a Philips Plasma / LCD- display must have pixel or sub-pixel defects exceeding the tolerances listed in the following table. -
Page 75: Cleaning And Troubleshooting
75BDL8051C/86BDL8051C Cleaning and Troubleshooting 11.1. Cleaning Caution When Using the Display • Do not bring your hands, face or objects close to the ventilation holes of the display. The top of the display is usually very hot due to the high temperature of exhaust air being released through the ventilation holes. Burns or personal injuries may occur if any body parts are brought too close. - Page 76 75BDL8051C/86BDL8051C 11.2. Troubleshooting Symptom Possible Cause Remedy No picture is displayed 1. The power cord is disconnected. 1. Plug in the power cord. 2. The main power switch on the back of 2. Make sure that the power switch is the display is not switched on.
- Page 77 75BDL8051C/86BDL8051C How to setup the settings in the menu to Daisy chained by RS232 and no IR cable 1. The first display sets as “Primary” on control all the monitors at the same time OSD (Advanced option/IR control item), and individually via RC? others set as “Secondary”.
- Page 78 75BDL8051C/86BDL8051C Technical Specifications Display: 75BDL8051C Item Specifications Screen Size (Active Area) 189.3 cm / 74.5 inches Aspect Ratio 16:9 Number of pixels 3840 (H) x 2160 (V) Pixel pitch 0.4935 (H) x 0.4935 (V) [mm] Displayable colors 1.07 Billion colors...
- Page 79 75BDL8051C/86BDL8051C General: Item Specifications Power Input 100 - 240V~, 50/60HZ, 6.5A Power Output 100 - 240V~, 50/60HZ, 2.5A Power Consumption (Max) 340 W Power Consumption (typ.) 240 W Power Consumption (Standby & Off) <0.5 W Dimensions (Without Stand) [W x H x D] 1703.8 x 982.0 x 99.7 mm...
- Page 80 75BDL8051C/86BDL8051C Display: 86BDL8051C Item Specifications Screen Size (Active Area) 217.4 cm / 85.6 inches Aspect Ratio 16:9 Number of pixels 3840 (H) x 2160 (V) Pixel pitch 0.4935 (H) x 0.4935 (V) [mm] Displayable colors 1.07 Billion colors Brightness (typical)
- Page 81 75BDL8051C/86BDL8051C General: Item Specifications Power Input 100 - 240V~, 50/60HZ, 7.5A Power Output 100 - 240V~, 50/60HZ, 2.5A Power Consumption (Max) 460 W Power Consumption (typ.) 300 W Power Consumption (Standby & Off) <0.5 W Dimensions (Without Stand) [W x H x D] 1949x 1120x 93.0 mm...
- Page 82 LIMITED WARRANTY In the unlikely event the product requires service, we will arrange for your Philips product to be serviced free-of-charge within the warranty period, provided that the product was used in accordance with the user manual (e.g. in the intended environment).
- Page 83 75BDL8051C/86BDL8051C WARRANTY PERIOD Warranty period for PHILIPS signage display is listed as below, for areas not covered in this table, please follow their warranty statement. Standard warranty period for PHILIPS signage display is listed as below, for areas not covered in this table, please follow the local warranty statement.
- Page 84 This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are regis- tered trademarks of Koninklijke Philips N.V. and are used under license.