Philips 75BDL8051C User Manual page 39

75BDL8051C/86BDL8051C
Off Timer
Set automatic power off time (in hours).
Schedule
1. Default start time and end time are 00:00.
2. Start time and End time must be from the same date of
the schedule.
■ Set lifecycle.
- Back:
■ Exit without saving changes.
Save:
-
■ Save schedule data.
HDMI with One Wire
CEC control.
• {Off} - Disable CEC.(Default)
• {On} - Enable CEC.
The following features are supported:
• One Touch Play allows devices to switch the display to
use it as the active source when playback starts.
• System Standby enables users to switch multiple
devices to standby mode with the press of one button
(HDMI with One Wire Power off is On).
Auto signal detection
This function allows the system to detect and display the
available signal sources automatically.
Conditions for Auto Signal Detection:
1. Sub mode is "Off"
2. After showing Logo
3. Power state is not Power Off
The options are:
{Off}, {All}, {Failover}
{Off}: Disable Auto signal detection
{All}: OPS -> HDMI1 -> HDMI2 -> HDMI3 -> HDMI4 ->
DisplayPort -> DVI-D ->USB-TypeC -> VGA -> Media Player
-> SmartCMS -> Home
{Failover}:
- Failover 1: OPS(default)
- Failover 2: OPS(default)
- Faliover 3: OPS(default)
- Failover 4: OPS(default)
- Failover 5: OPS(default)
- Failover 6: OPS(default)
- Failover 7: OPS(default)
- Failover 8: OPS(default)
- Failover 9: OPS(default)
- Failover 10: OPS(default)
- Failover 11: OPS(default)
- Failover 12: OPS(default)
Language
Select the language used in the OSD menu.
The options are: English/Deutsch/ 简体中文 /Français/
Italiano/Español/Pyccкий/Polski/Türkçe/ 繁體中文 / 日本語
/Português/ /Danish/Swedish/Finnish/Norwegian/
Dutch.
28