Mounting On A Wall; Vesa Grid - Philips 75BDL8051C User Manual

1.4.

Mounting on a Wall

To mount this display on a wall, a standard wall-mounting kit (commercially available) is required. It is recommended that you
use a mounting interface that complied with TUV-GS and /or UL1678 standard in North America.

VESA Grid

Table
1. Prepare a flat and horizontal surface that is larger than the display and spread a thick protective sheet on it to facilitate your
operation without scratching the screen.
2. Ensure you have all accessories for all types of mounting (wall mount, ceiling mount, table stand, etc).
3. Follow the instructions that came with the base mounting kit. Failure to follow the correct mounting procedures could result
in damage to the equipment, or injury to the user or installer. The product warranty does not cover the damage caused by
improper installation.
4. For the wall-mounting kit, use the M8 mounting screws (with a length 15 mm longer than the thickness of the mounting
bracket) and tighten them securely.
5. 75BDL8051C: Weight of the unit without base=TBD kg. The equipment and its associated mounting facilities still remain
secure during the test. Use only the UL listed Wall Mount Bracket with a minimum weight/load of TBD kg.
6. 86BDL8051C: Weight of the unit without base=79.5 kg. The equipment and its associated mounting facilities still remain
secure during the test. Use only the UL listed Wall Mount Bracket with a minimum weight/load of 79.5 kg.
1.4.1. VESA Grid
75BDL8051C
86BDL8051C
Caution:
To prevent the display from falling:
• For wall or ceiling mounting, we recommend that you install the display with metal brackets which are commercially
available. For detailed instructions about the installation, refer to the guide provided with the bracket.
• To prevent the display from falling in case of earthquake or other natural disaster, please consult the manufacturer of the
bracket for the mounting location.
• As this product is high and heavy, the installation of this product is recommended to be performed by four technicians.
Required space for ventilation
Leave a space of 100 mm at the top, rear, right and left of the display
for ventilation.
NOTE: We recommend you contact a professional technician when
installing the display on a wall. We are not responsible for any
damage to the product if the installation is not performed by a
professional technician.
75BDL8051C
Protective Sheet
600(H) x 400(V) mm
600(H) x 400(V) mm
VESA Grid
Table
100 mm
5
75BDL8051C/86BDL8051C
86BDL8051C
Protective Sheet
100 mm
100 mm
100 mm