Installing and removing system components
Topics:
•
Safety instructions
•
Before working inside your system
•
After working inside your system
•
Recommended tools
•
Optional front bezel
•
System cover
•
Drive backplane cover
•
Air shroud
•
Cooling fans
•
Intrusion switch module
•
Drives
•
Optional optical drive
•
Drive backplane
•
Cable routing
•
System memory
•
Processor and heat sink module
•
Expansion cards and expansion card risers
•
Drive cage
•
Optional serial COM port
•
MicroSD card
•
Optional BOSS S1 card
•
Optional IDSDM module
•
Optional OCP card
•
Front mounting front PERC module
•
System battery
•
Optional internal USB card
•
VGA module
•
Power supply unit
•
Power interposer board
•
System board
•
Trusted Platform Module
•
Control panel
Safety instructions
NOTE:
Whenever you need to lift the system, get others to assist you. To avoid injury, do not attempt to lift the system by
yourself.
CAUTION:
Ensure that two or more people lift the system horizontally from the box and place it on a flat
surface, rack lift, or into the rails.
WARNING:
Opening or removing the system cover while the system is powered on may expose you to a risk of
electric shock.
WARNING:
Do not operate the system without the cover for a duration exceeding five minutes. Operating the
system without the system cover can result in component damage.
Installing and removing system components
5
25