Table of Contents
Advertisement
Confirming the device types and IP
addresses of devices registered in the
[Device List] window
Display the [Device information] window using one of the
following methods.
• Select a device in the device list, and click the device
information button in the upper part of the [Device List]
window.
• Right-click a device in the device list, and select [Device
information] in the context menu that appears.
Manually adding a receiver/RMU-01 to the
[Device List] window
Display the [Add a new device] window using one of the
following methods.
• Click the [+] button in the upper part of the [Device List]
window.
• Select [Device] menu > [Add a new device].
After entering the following items in the window that
appears, click [OK] to close the window.
The receiver/RMU-01 unit is added to the device list
window.
IP Address: Enters the IP address of the receiver/RMU-01
to be added.
Receiver: Selects the model of the receiver you want to
add.
RMU (remote control unit): Selects the model of the
remote control unit you want to add.
To cancel the addition of a receiver/RMU-01 unit
Click [Cancel].
Context window
Right-click on a node in the [Device List] window to
display the context window.
Property: Displays the [Property] window for the selected
device.
For details on the [Property] window, see "[Property]
Window" on page 44.
Device information: Displays information about the
selected device.
For more information on the contents, see "Confirming
the device types and IP addresses of devices registered in
the [Device List] window" on page 28.
Add to Status Viewer: Adds the selected receiver channel
to the status viewer in the main window.
When you right-click a receiver, the receiver channel for
that receiver is added to the status viewer.
Connect: Reconnects to receivers and RMU-01 units for
which communication with Wireless Studio has been
interrupted.
Save Single Settings: Saves the settings of the selected
device to a file.
For details, see "To save the individual settings of a device
to a file" on page 23.
Load Single Settings: Loads settings that are saved to a
file to the selected device.
For details, see "To open a previously saved individual
settings file and apply its settings" on page 23.
28
Advertisement
Table of Contents
