Sony DWR-R02DN User Manual page 57

• Checkbox selected
[Other settings] Window
The [Other settings] window allows you to configure the
peak level hold condition of the AF level meter that
appears in the status viewer and switch the unit display for
the RF level.
[AF peak hold setting]
Configures hold settings for the peak levels of the AF level
meters that appear in the status viewer.
2sec: Holds for 2 second.
HOLD: Hold is maintained until it is released.
[The unit of RF level]
Selects the units (dBuVemf or dBm) for the RF level that
appears in the [RF Chart Grapher] tab and the [Channel
Plan Adviser] window.
Releasing the hold status
Peak levels that are being held can be released in the main
page of Wireless Studio.
Clicking [Clear AF Peak hold] in the status viewer releases
the hold status of the peak levels for all the receiver
channels displayed.
[Startup settings] Window
You can configure startup settings in the [Startup settings]
window.
a [Startup from EXE file] setting
Specify the startup mode used when starting Wireless
Studio from the start menu.
Select the [Always work by below setting] checkbox to
always start Wireless Studio using the specified mode.
Offline mode: Start Wireless Studio in offline mode.
Online mode: Start Wireless Studio in online mode.
b [Startup from dwl file] setting
Specify the startup mode used when you start Wireless
Studio by double-clicking a settings file (.dwl or .dwl2).
Select the [Always work by below setting] checkbox to
always start Wireless Studio using the specified mode.
Offline mode: Start Wireless Studio in offline mode.
Load all receiver's settings then startup Online mode:
Apply the settings of the settings file to the receivers, and
then start Wireless Studio in online mode.
Load all receiver's and transmitter's settings then
startup Online mode: Apply the settings of the settings
file to the receivers and transmitters, and then start
Wireless Studio in online mode.
For details on settings files, see "Using Settings Files" on
page 21.
57
1
2