Table of Contents
Advertisement
Note
When you delete a memo with a green mark, the same
memos that appear for the other receiver channels will also
be deleted.
To move memos
Drag the mark in the graph of the memo you want to move
to your desired position.
Note
When you move a memo with a green mark, the same
memos that appear for the other receiver channels will also
be moved.
[RF Chart Analyzer] Tab
In the [RF Chart Analyzer] tab, you can view the contents
of files recorded with the [RF Chart Grapher]. This allows
you to analyze the results of signal environment
monitoring. You can also use the mark function to add
memos to the monitoring results.
1
2
a Control items
Open: Registers the file to the file list. Only files created
using the [RF Chart Grapher] can be registered to the file
list.
Save as: Saves the information of the file selected in the
file list.
Close: Deletes the file selected in the file list from the file
list.
Close all: Deletes all the files registered to the file list from
the file list.
b Main monitor area
File list: Displays the list of loaded files. The information
of the file selected here is displayed in the graph display
area, alert list, and mark list.
Note
The other items function identically to those in the [RF
Chart Grapher] tab. However, the [Auto save] and [Auto
Scroll] functions do not exist in the [RF Chart Analyzer]
tab.
For details, see "[RF Chart Grapher] Tab" on page 34.
[Spectrum Analyzer] Tab
The [Spectrum Analyzer] tab allows you to perform a
spectrum scan of a specified frequency band using the
receivers. This allows you to visually confirm the
existence of interference on the frequency bands in use.
In addition, if you configure the optimal groups and
channels using [Channel Plan Adviser] beforehand, the
[Channel Plan Adviser] settings can be applied to
[Spectrum Analyzer]. This allows you to visually confirm
the existence of interference on the groups and channels
recommended by [Channel Plan Adviser].
1
2
3
5
40
4
6
7
8
Advertisement
Table of Contents
