Call Meters - Philips CT5888/000APMEA Manual

Minute Reminder
To manage your calls duration, you can use this menu
to select whether or not the phone will emit an alert to
inform you of the duration of your call when you are
on the phone (the other party will not hear the alert
tone). You can also select the time lapse for the alert:
Off, 40s, 50s, 55s.
Anykey answer
You can turn this option
Once you have activated this feature, when there is an
incoming call, you can press any key to answer the
call, except ) and R as they are used for the
rejection of calls.
Auto redial
You can turn this option
and the party you wish to call is busy, your phone will
redial the number automatically. The redial time lapse
are as follows: First redial attempt is 0 seconds, second
redial attempt is 5 seconds, third to fifth redial
attempt is 1 minute, sixth to tenth redial attempt is 3
minutes. After the seventh redial attempt, the phone
will stop redialling. A beep tone is emitted when the
phone starts redialling the number. A special beep
tone is emitted when the call is connected.
When there is an incoming call, the redial will stop
automatically.
54
On Off
or (default is Off).
On or Off. When set to
The redial time lapse will increase after every redial
attempt.
Auto answer
Allows you to set the
set to On, the phone will answer the call
automatically after 10 seconds.
Active flip
When set to On, you can simply flip open the phone
to answer a call. The phone will emit a beep tone to
indicate that the call has ended.
Send ID (network dependent)
Allows you to select whether or not to send your
phone number to the called party.You can also check
On
the status of this option:
This menu allows you to select: On, Off, Status.
Off
1. Select or
of your phone number to the called party. If your
selection is not supported by the network, the
screen will display "Not supported by network".

Call meters

This menu allows you to display the last call,
accumulated call timer, automatic call cost information
and set the call duration alert tone and call cost display.
Auto Answer
feature
On or Off.
On
will disable or enable the sending
Call Settings
On or Off. If