Table of Contents
Advertisement
Install battery
4. With the metallic contacts
facing downwards, press
the battery down into its
slot until it locks into
place.
Replacing the back
cover
5. Align and hook the
back cover to the right
side of the phone and
press down the back
cover until it locks into
place with the left side
of the phone.
When inserting the battery,
be careful not to damage the
metallic connectors of the
SIM card slot.
6. Remove the protective film covering the screen
before using the phone.
8
Switch on the phone
Long press ) to switch on the phone. You may be
required to enter the PIN code (which is the 4 - 8 digit
security code of your SIM card). The PIN code is
preconfigured and provided to you by your network
operator or retailer. To change the PIN code, see
"Change code" page 53.
If you enter a wrong PIN code 3 times in succession,
your SIM card will be blocked. To unblock it, you must
request the PUK code from your network operator.
Set date and time
When you switch on the phone for the first time,
the time indicated on your phone is based on the
factory default time setting. Hence, you need to
enter the phone settings to reset the date and time
of your phone. Set the date by pressing the
corresponding numeric keys on the keypad (press
R
Clear
to erase a number). Then, proceed to set
the time in the same way.
For more information regarding date and time
settings, please see "Clock settings" page 42.
Getting Started
Advertisement
Table of Contents
