Connecting A Decoder - Beko 15LB450 Operating Instructions Manual

Connecting a decoder

Via SCART
Make sure the TV and decoder are both
switched off.
Plug one end of the SCART lead (not
supplied) into the back of the decoder and the
other end into the SCART
on the back of the TV.
Switch on the decoder and the TV.
Press the AV button on the remote
AV
control to select AV1.
Via PHONO lead
Make sure the TV and decoder are both
switched off.
Note: For Decoder connection Via
PHONO lead your Decoder device should
have the tuner built in.
Plug one end of the PHONO lead into the video
and audio out sockets on the back of the
decoder and plug the other end into the video
and audio in sockets on the TV.
21