Beko 15LB450 Operating Instructions Manual page 7

Tuning with channel numbers
Enter the SETUP menu by pressing
the blue button.
Press OK button when CHANNEL
OK
row is blue.
Use OK button to select "S" for
OK
cable channels and "C" for
terrestrial broadcast.
7
Enter the channel number using the
Numeric buttons or use the
Volume up/down buttons to tune
channels.
Use the Program down button to
select PROGRAM NUMBER.
10
Use the Volume up/down or
numeric buttons to select the desired
programme number.
Use the Program down button to
select STORE. Press the OK button
and STORED will appear on the
OK
STORE line.
You have now stored the first
channel.
Use the Program up button to
select CHANNEL again and continue
the tuning procedure until you
have tuned in all the programmes
you want or the television can
receive.
To exit the SETUP menu press the
TV/TX button.
16:9 Picture format
Use the 16:9 picture format button
to change from 4:3 to 16:9 picture
ratio.
A black band may be present on the
top or bottom of the picture,
dependant on the broadcast.
This is not a fault, press the 16:9
button to return to a 4:3 format
picture.
Fine tuning
Although the search and Autoprogram
will automatically try and tune to the
best reception, in areas of poor reception
a bit of fine tuning may be required.
In the SETUP menu use the
Program up/down
select FINE TUNING. Use the
Volume up/down buttons to fine
tune.
When you have finished use the
Program down button to select
STORE and press the OK button.
OK
STORE will appear on the STORE
line.
SETUP
CHANNEL
I
SYSTEM
SEARCH
FINE TUNE
PROGRAM NUMBER
AUTO PROGRAM
STORE
buttons to