Beko 15LB450 Operating Instructions Manual page 24

USE AS A PC MONITOR
Your LCD-TV equipment is provided with VGA inputs, it may be used as a PC
monitor as well.(Plug&Play)
A time delay is present during changing from Tv to Pc mode this normal and not
a fault.
3
5
HOLD 4
6
SUB
8
7
9
UPDATE
AV 0
-/--
MIX
TV/PC
OK
3 Menu's
. Press the menu button on the TV.
. To browse the options use
. To select options use
. To adjust settings use
. To store settings .
browse to "Save"using
select using VOL
select "Yes" using
to exit press "menu" on the TV.
Note 1: When the system is in the monitor mode, the sound from the TV channel selected
may be heard from the speakers.When you enter this mode, the sound control buttons on
the remote control
( VOL / VOL
Note 2: When the system is in the monitor mode, the STANDBY button is operational.Upon
exit from STANDBY,the system starts up in the TV mode again.
BRIGHTNESS
After entering the Brightness Menu using the VOL
brightness value of the monitor to the desired level by using the PR
CONTRAST
After entering the Contrast Menu using the VOL
contrast value of the monitor to the desired level by using the PR
POSITION
After entering the Position Menu using the VOL
geometrical adjustment value of the monitor to the desired level by using the PR
buttons.
H-POSITION : Horizontal position adjustment
V-POSITION : Vertical position adjustment
IMAGE
After entering the Image Menu using the VOL
adjustment value of the monitor to the desired level by using the PR
PHASE : ADC sampling phase adjustment
CLOCK : ADC clock count Per line
Preparation
1 Plug one end of a VGA lead to the computer monitor
output and the other end to the VGA input on the back of the
TV.
2 To enter "PC" mode from TV mode press mix button
on remote control.
MIX
To exit "PC" mode press mix button on the remote
TV/PC
control, or select TV mode in the "TV selection" menu.
BRIGHTNESS CONTRAST
INFO MISC
PR / PR
VOL / VOL on the TV.
PR / PR
PR / PR
/ VOL
PR / PR
MUTE) become functional.
POSITION IMAGE
TV SELECT GAMMA
on the TV.
/ VOL
/ VOL
/ VOL
/ VOL buttons, you may set the phase
AUTO CONFIG
SAVE
buttons, you may set the
/ PR buttons.
buttons, you may set the
/ PR buttons.
buttons, you may set the
/ PR
/ PR buttons
23