Sound Menu - Beko 15LB450 Operating Instructions Manual

TV set up
The TV set up is accessed through a menu
system.
Once you have stored your settings the TV
will default to these levels when you switch
on.
To enter the MAIN menu press the
Menu button.
Once in the MAIN menu use the
Program up/ down buttons to
select items in the menu and
the OK to access sub menus
OK
12
or use the coloured fastext buttons
for quick access.
Blue button - TUNING
Red button - SOUND
Green button - PICTURE
Purfle button - FEATURES
MAIN MENU
SOUND
PICTURE
PROGRAM TABLE
SETUP
FEATURE
Please note
If you do not press any buttons for 15 seconds
the TV will exit the menu system.
Sound menu (red button)
VOLUME
BALANCE
SOUND TYPE
SOUND MODE
AVL
EQUALISER
HEADPHONE
STORE
Select the required item in the menu
using the Program up/down buttons
and make the changes pressing
Volume up/down buttons.
SOUND
MONO
SPATIAL
ON
Volume
Sets default volume using the Volume up/
down buttons.
To save your settings, select
STORE and press the OK button.
STORED will be displayed. Press
OK
the Menu button to go back to
the previous menu.
Balance
Sets the sound balance
mode using the Volume up/down
buttons
To save your settings, select
OK
STORE and press the OK button.
will be displayed. Press
STORED
the Menu button to go back to the
previous menu.
Sound type
This item shows STEREO when receiving
stereo transmission and MONO for mono
transmissions.
If the channel you are watching is in
Nicam stereo the On Screen Display
will show NICAM STEREO for a
while.
Please Note
If, while watching a nicam stereo channel,
the signal strength drops and the system
cannot receive nicam stereo the OSD will
show MONO. If the signal strength
increases again and nicam stereo can be
received again, the OSD will show
NICAM STEREO.
To save your settings, select STORE
OK
and press theOK button. STORED
will be displayed. Press the Menu
button to go back to the previous
menu.