Speaker Volume; Handset Volume (Mfc-665Cw Only) - Brother MFC-440CN User Manual

Chapter 3
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose Volume.
Press OK.
d
Press a or b to choose Beeper.
Press OK.
e
Press a or b to choose Low, Med,
High or Off
Press OK.
f
Press Stop/Exit.

Speaker Volume

You can choose a range of speaker volume
levels, from High to Off.
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose Volume.
Press OK.
d
Press a or b to choose Speaker.
Press OK.
e
Press a or b to choose Low, Med,
High or Off.
Press OK.
f
Press Stop/Exit.
You can also adjust the speaker volume by
pressing Hook or Speaker Phone.
a
Press Hook or Speaker Phone.
b
Press d or c
This setting will stay until you change it
again.
c
Press Hook or Speaker Phone.
28
3
.
Note
(MFC-665CW and MFC-845CW only)
You can adjust the speaker volume while
you are listening to your outgoing
message (OGM) and incoming messages
(ICM's) by pressing
Handset Volume (MFC-665CW
only)
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose Volume.
Press OK.
d
Press a or b to choose Handset.
Press OK.
e
Press a or b to choose Low or High.
Press OK.
f
Press Stop/Exit.
Note
• You can adjust the handset volume any
time you are talking on the telephone.
There are two handset volume levels, Low
and High. The default setting is Low.
• Press d or c
level. The LCD shows the setting you are
choosing. The new setting will remain until
you change it again.
d or c .
3
to adjust the volume