Defining Mstp Interface Settings - D-Link DES-3010FA Web User Manual

Defining MSTP Interface Settings

Network Administrators can assign MSTP Interface settings in the MSTP Instance Settings Page
interface settings:
1. Click Advanced Setup > Spanning Tree > MSTP > Interface Settings. The MSTP Interface Settings Page
opens:
Figure 93: MSTP Interface Settings Page
MSTP Instance Settings Page contains the following fields:
The
•
Instance ID — Lists the MSTP instances configured on the device. Possible field range is 0-15.
•
Interface — Displays the interface for which the MSTP settings are displayed. The possible field values are:
–
Port — Specifies the port for which the MSTP settings are displayed.
–
LAG — Specifies the LAG for which the MSTP settings are displayed.
•
MSTP — Specifies whether or not MSTP is enable on the interface. The possible field values are:
–
Enabled — Enables MSTP on the interface.
–
Disabled — Disables MSTP on the interface.
•
Port State— Indicates whether the port is enabled for the specific instance. The possible field values are:
–
Enabled — Enables the port for the specific instance.
–
Disabled — Disables the port for the specific instance.
Page 151
Configuring Spanning Tree
Defining Multiple Spanning Tree
.
To define MSTP