D-Link DES-3010FA Web User Manual page 97

D-Link DES-3010FA/GA User Guide
•
Broadcast Mode — Specifies the Broadcast mode currently enabled on the device. The possible field values
are:
–
Unknown Unicast, Multicast & Broadcast — Counts Unicast, Multicast, and Broadcast traffic.
–
Multicast & Broadcast — Counts Broadcast and Multicast traffic together.
–
Broadcast Only — Counts only Broadcast traffic.
•
Broadcast Rate Threshold — The maximum rate (kilobytes per second) at which unknown packets are for-
warded. The range is 0-1,000,000. The default value is zero. All values are rounded to the nearest 64Kbps. If
the field value is under 64Kbps, the value is rounded up to 64Kbps, with the exception of the value zero.
2. Click . The Storm Control Settings Page opens:
Figure 50: Storm Control Settings Page
3. Modify the Port, Enable Broadcast Control, Broadcast Mode, and Broadcast Rate Threshold fields.
4. Click . Storm control is enabled on the device.
Page 96