Managing Device Information - D-Link DES-3010FA Web User Manual

Layer 2 switch, managed 8 port 10/100base-tx with gigabit & fiber uplinks
Hide thumbs Also See for DES-3010FA:
Table of Contents

Advertisement

Section 5. Managing Device Information
The System Information Page contains parameters for configuring general device information, including the sys-
tem name, location, and contact, the system MAC Address, System Object ID, System Up Time, System IP and
MAC addresses, and both software and hardware versions. To define the general system information:
1.
Click System > General > Description. The System Information Page opens:
Figure 24: System Information Page
The System Information Page contains the following fields:
Model Name — Displays the device model number and name.
System Name — Defines the user-defined device name. The field range is 0-160 characters.
System Location — Defines the location where the system is currently running. The field range is 0-160
characters.
System Contact — Defines the name of the contact person. The field range is 0-160 characters.
System Object ID — Displays the vendor's authoritative identification of the network management sub-
system contained in the entity.
System Up Time — Displays the amount of time since the most recent device reset. The system time is dis-
played in the following format: Days, Hours, Minutes, and Seconds. For example, 41 days, 2 hours, 22 min-
utes and 15 seconds.
Page 59

Managing Device Information

Advertisement

Table of Contents
loading

This manual is also suitable for:

Des-3010ga3010f - des switch

Table of Contents