D-Link DFL-1600 User Manual page 250

230
Example:
This example describes how to set up a PPTP server. The LAN network is
a 192.168.1.0/24 network, and 10.0.0.0/24 is the network on the WAN
interface. PPTP clients will connect to the PPTP server on 10.0.0.1 on the
WAN interface, in order to access resources on the LAN interface.
WebUI
:
1. Local User Database
We need to create a local user database to store user information in.
For more information, see 17.2.1Local User Database section.
User Authentication
User Database:
Enter a name for the user database, "UserDB" will be used in this example:
Name: UserDB
Then click OK
2. Add User to Local User Database
We need to add a user to the local user database we created above.
User Authentication
Add User:
Enter the following:
Username: testuser
Password: testpassword
Confirm Password: testpassword
It is possible to configure a static IP for this user in the Per-user PPTP/L2TP
IP Configuration section. Then click OK
Configuring PPTP Server
Local User Databases
Local User Databases
D-Link Firewalls User's Guide
Chapter 22. VPN Protocols & Tunnels
Add Local
UserDB