D-Link DFL-1600 User Manual page 309

27.3. Scenarios: Enabling Transparent Mode
This scenario shows how to configure a Switch Route over the LAN and
DMZ interfaces for the 10.0.0.0/24 address space. It is assumed that the
WAN interface has been configured correctly already.
WebUI
:
1. Interfaces
Interfaces Ethernet
Enter the following:
IP Address: 10.0.0.1
Network: 10.0.0.0/24
Transparent Mode: Disable
Add route for interface network: Disable
Then click OK
Interfaces Ethernet
Enter the following:
IP Address: 10.0.0.2
Network: 10.0.0.0/24
Transparent Mode: Disable
Add route for interface network: Disable
Then click OK
2. Interface Groups
Interfaces Interface Groups
Enter the following:
Name: TransparentGroup
Security/Transport Equivalent: Disable
Interfaces: Select LAN and DMZ
Then click OK
3. Routing
Routing Main Routing Table
Enter the following:
Switched Interfaces: TransparentGroup
Network: 10.0.0.0/24
Metric: 0
Then click OK
Edit (LAN):
Edit (DMZ):
D-Link Firewalls User's Guide
Add Interface Group:
Add Switch Route:
289