Table of Contents
Advertisement
Using the Boot Menu
Configuring the IP
IP Address: Enter an IP address for the VoIP gateway.
Subnet Mask: Enter a subnet mask for the VoIP gateway.
Default Gateway: Enter the IP address of the WAN device (usually a
router) you are using to make the WAN connection.
After you have finished, press <Ctrl+S> to save changes to RAM. Next, press
the <Esc> key to return to the Boot Menu. Position the cursor over the Save
Changes item and press <Enter>. This will save the settings to NV-RAM so
they will still be present after powering off or restarting the device. Position the
cursor over the Restart System item and press <Enter> for the changes to
take effect. Your VoIP is now configured for use.
Configuring the SNMP
This screen allows you to set an SNMP trap manager.
Each item on the SNMP Configuration screen is described below:
SNMP AuthTrap: Enables or disables the SNMP trap function
Community: Enter the community name of the trap manager.
IP: Enter the IP address of the trap manager.
Boot Menu—SNMP Configuration screen
62
Advertisement
Table of Contents
