Table of Contents
Advertisement
Using Web-Based Management
The DG-102SP VoIP Gateway offers an embedded Web-based (hypertext) in-
terface allowing users to manage the device from anywhere on the network
through a standard browser such as Netscape Navigator, 6.x or later, or Microsoft
Internet Explorer, 6.x or later. The Web browser acts as a universal access tool
and can communicate directly with the device using HTTP protocol. Your
browser screen may vary with the screen shots (pictures) in this guide.
Note: This Web-based Management Module does not accept Chinese language
input (or other languages requiring two bytes per character).
The first step in getting started in using Web based management for your device
is to secure a browser. A Web browser is a program that allows a person to
read hypertext, for example, Netscape Navigator, 6.x or later, or Microsoft Internet
Explorer, 6.x or later. Follow the installation instructions for the browser.
The second and last step is to configure the IP interface of the device. This can
be done manually through a console. See the Configuring the VoIP Gateway
using a Web Browser section of the "Configuration" section for specific
instructions.
Management
To begin managing your device simply run the browser you have installed on
your computer and point it to the IP address you have defined for the device.
The URL in the address bar should read similar to: http://123.123.123.123, where
the numbers 123 represent the IP address of the device.
In the page that opens, click on the following Login to the web-based
management module button:
The categories listed on the left-side of the web-based management module
include:
Config IP (Config Device IP Address)
Device Information
Telephony Configuration
SIP Configuration (Server, User Agent and Peer to Peer)
DHCP Configuration (Dynamic IP Assignment and Static IP Assignment)
11
Advertisement
Table of Contents
