Table of Contents
Advertisement
Using Web-Based Management
Dynamic IP Assignment
Use the Dynamic IP Assignment to configure the device to act as a DHCP
server for the LAN.
The items on this window are described below:
Start IP Address: This is the base (starting) address for the IP pool of
unassigned IP addresses.
IP Range: This is the range of contiguous, IP addresses above the base
IP Address.
Netmask: This mask informs the client how the destination IP address is
to be divided into network, subnet, and host parts. The netmask has ones
in the bit positions in the 32-bit address which are to be used for the
network and subnet parts, and zeros for the host part.
Default Gateway: This specifies the Gateway IP Address that will be
assigned to and used by the DHCP clients.
Dynamic IP Assignment window
20
Advertisement
Table of Contents
