Replacing The Power Door; Removing The Vga Door - Dell Latitude E6400 XFR Service Manual

37.12

Replacing the Power Door

1. Insert door hinge onto assembly and align the hinge divots.
2. Replace the two M2.5 x 5-mm screws.
3. Follow the procedures in After Working on Your Computer.
37.13

Removing the VGA Door

1 Door
1. Follow the procedures in Before Working on Your Computer.
2. Open the door to relieve hinge pressure.
3. Remove the two M3 x 3-mm screws from the bottom of the base assembly.
Page 71
™
Dell Latitude™ E6400 XFR Service Manual
Parts
2
2 M3 x 3 mm (2)
1
Location