Dell 1955 Hardware Owner's Manual page 46

Table 2-2. System Setup Program Options (continued)
Option
Boot Sequence
Hard-Disk Drive
Sequence
USB Flash Drive
Emulation Type
(Auto default)
Integrated Devices
PCI IRQ Assignment
Serial Communication
System Security
Keyboard NumLock
(On default)
Report Keyboard Errors
(Report default)
46
Using the System Setup Program
Description
Determines the order in which the system searches for boot devices
during system startup. Available options can include the USB diskette
drive, USB CD drive, hard drives, and USB flash drive.
NOTE:
A USB device will be displayed in the boot order screen only if it is
attached to the system before the system enters BIOS.
Determines the order in which the system searches the hard drives during
system startup. The selections depend on the hard drives installed in your
system.
Determines the emulation type for a USB flash drive. Hard disk allows
the USB flash drive to act as a hard drive. Floppy allows the USB flash
drive to act as a removable diskette drive. Auto automatically chooses an
emulation type.
See "Integrated Devices Screen" on page 48.
Displays a screen to change the IRQ assigned to each of the integrated
devices on the PCI bus, and any installed expansion cards that require an
IRQ.
See "Serial Communication Screen" on page 49.
Displays a screen to configure the system password and setup password
features. See "Using the System Password" on page 51 and "Using the
Setup Password" on page 53 for more information.
Determines whether your system starts up with the NumLock mode
activated on 101- or 102-key keyboards (does not apply to 84-key
keyboards).
Enables or disables reporting of keyboard errors during the POST. Select
Report for host systems that have keyboards attached. Select Do Not
Report to suppress all error messages relating to the keyboard or keyboard
controller during POST. This setting does not affect the operation of the
keyboard itself if a keyboard is attached to the system.