Figure 3-15. Closing a Server Module
1
cover
4
cover-release buttons (2)
Removing and Installing Server Module Components
The following procedures describe how to remove and install the following components:
•
Memory modules
•
Daughter cards
•
Integrated NIC TOE feature
•
Processors
•
Server module battery
•
Hard drives
Memory
You can add system memory to a maximum capacity of 32 GB (dual-ranked memory modules) or 16 GB
(single-ranked memory modules) by installing 533-MHz or 677-Mhz (when available) fully buffered
DIMM(FBD) DDR II memory modules. 256-MB, 512-MB, 1-GB, 2-GB, and 4-GB memory modules are
supported. You can purchase memory upgrade kits from Dell.
NOTICE:
Use only 533-MHz or 677-MHz (when available) DDR II FB memory modules.
1
4
2
server module
2
3
3
alignment pins (6)
Installing System Options
77