Switch Cover - HP 510 Maintenance And Service Manual

Switch cover

Description
For use only with computer models with wireless LAN capability (includes wireless
button and wireless light)
For use only with computer models without wireless LAN capability
Before removing the switch cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power cord.
4. Remove the battery (see
Remove the switch cover:
1. Turn the computer upside down, with the rear panel toward you.
2. Remove the seven Phillips PM2.0×9.0 screws (1) and the four Phillips PM2.0×2.0 screws (2) that
secure the switch cover to the computer.
3. Turn the computer display-side up, with front toward you.
4. Open the computer as far as possible.
38 Chapter 5 Removal and replacement procedures
Battery on page 29).
Spare part number
441623-001
441624-001
ENWW