Rtc Battery - HP 510 Maintenance And Service Manual

RTC battery

Description
RTC battery
Before removing the RTC battery, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power cord.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Memory/Mini PCI card module compartment cover (see
c. Optical drive (see
d. Switch cover (see
e. Keyboard (see
f. Display assembly (see
g. Base enclosure (see
Remove the RTC battery:
Use a non-conductive, flat-bladed tool to pry the RTC battery out of the socket.
▲
Reverse this procedure to install the RTC battery. Be sure the RTC battery is installed with the "+" sign
facing up.
ENWW
Battery on page 29).
Hard drive on page 30)
Optical drive on page
Switch cover on page
Keyboard on page 40)
Display assembly on page
Base enclosure on page
Spare part number
438556-001
Memory module on page
36)
38)
44)
49)
Component replacement procedures
32)
51