Selecting An Aspect Ratio; Using The Automatic Adjustment Feature - Hitachi CP-SX12000 User Manual

Selecting an aspect ratio

1.
Press the ASPECT button on the remote control.
Each time you press the button, the projector switches the mode for aspect
ratio in turn.
 For a computer signal
NORMAL  4:3  16:9  16:10
 For an HDMI or DVI-D signal
NORMAL  4:3  16:9  16:10
 For a video signal, s-video signal or component video signal
 For no signal
4:3 (fixed, except CP-WX11000) / FULL (fixed,
CP-WX11000)
*
● 16:10 / FULL: CP-WX11000 only. NATIVE: Except
CP-X10000. SMALL: Except CP-WX11000.
● The NORMAL mode keeps the original aspect ratio of
the signal.

Using the automatic adjustment feature

1. Press the AUTO button on the remote control.
Pressing this button performs the following.
 For a computer signal
The vertical position, the horizontal position and the
horizontal phase will be automatically adjusted.
Make sure that the application window is set to its
maximum size prior to attempting to use this feature.
A dark picture may still be incorrectly adjusted. Use a
bright picture when adjusting.
 For a video signal and s-video signal
The video format best suited for the respective input signal will be selected
automatically. This function is available only when the AUTO is selected for
the VIDEO FORMAT item in the INPUT menu (37). The vertical position
and horizontal position will be automatically set to the default.
 For a component video signal
The vertical position, horizontal position and horizontal phase will be
automatically set to the default.
● The automatic adjustment operation requires approx. 10 seconds. Also
please note that it may not function correctly with some input. When this
function is performed for a video signal, a certain extra such as a line may
appear outside a picture.
● The items adjusted by this function may vary when the FINE or DISABLE is
selected for the AUTO ADJUST item of the SERVICE item in the OPTION
menu (50).
4:3  16:9  16:10
*
 SMALL
*
 14:9  SMALL
*
 14:9  SMALL
Operating
LASER
INDICATOR
* *
 NATIVE  FULL
STANDBY/ON MY SOURCE COMPUTER
VIDEO
ID 1 ID 3
* *
 NATIVE  FULL
DIGITAL
ID 2 ID 4
BLANK
*
 NATIVE  FULL
*
LASER
INDICATOR
ENTER
STANDBY/ON MY SOURCE COMPUTER
ID 1 ID 3
FREEZE
ID 2 ID 4
SHUTTER
ASPECT
BLANK
PbyP AUTO
POSITION
MY BUTTON
MAGNIFY
1 3
ON
ENTER
2 4
OFF
FREEZE
KEYSTONE
FOCUS ZOOM
+ +
SHUTTER
ASPECT
LENS SHIFT
- -
PbyP AUTO
MY BUTTON MAGNIFY
1 3
2 4
KEYSTONE
FOCUS ZOOM
+ +
LENS SHIFT
- -
*
*
LASER
*
VIDEO
DIGITAL
MENU
RESET
LASER
MENU
RESET
POSITION
ON
OFF
23