Setting Up; Installation Environment; Projection Style - Hitachi CP-SX12000 User Manual

Setting up

Setting up
Read this chapter through fi rst. Then install the projector into place.

Installation environment

This product requires an installing place that is stable, cool and airy. Check your
installation environment in accordance with the following.
WARNING
uneven, tilted, or vibrating place.
►Do not place the product near water - for example, near a bathtub, washbowl,
kitchen sink, or laundry tub; in a wet basement, near a swimming pool, beach; or
outdoors.
CAUTION
►Do not place the product in a dusty, smoky, or humid place -
for example, on a passage, in a smoking space, in a kitchen, or outdoors.
►Do not place the product near heat sources - for example, radiators, heat
registers, stoves, or other product (including amplifi ers) that produces heat.
►Do not place this product in a magnetic fi eld.
NOTICE
►Do not place the product in a place where radio interference may
be caused.
► Do not place the projector in a place where any strong lights hit the remote
sensors.

Projection style

This projector can be used by the following projection styles. Choose the style
suitable to your use.
NOTE
• In the case of ceiling mount, upward projection, or downward
projection, the specifi ed mounting accessories (  77 ) and service are required
to install the projector. Request them from your dealer. Ask your dealer for
installation other than styles above.
WARNING
►Use only the mounting accessories the manufacturer specifi ed, and leave
installing and removing the projector with the mounting accessories to the
service personnel.
8
►Do not place the product on an unstable surface such as an
(2) Ceiling mount
(suspended from a ceiling)
►Consult with your dealer about installation beforehand.
(1) Standard style
(placed on a table)