Panasonic Toughbook CF-C1ADAAZ6M Reference Manual page 144

Wireless LAN
4
Input the key you set for the access point to recognize the computer, and click [OK].
Wait for the computer to connect to the wireless LAN access point.
When the icon on the notification area is changed to
5
Click [Close].
NOTE
The settings depend on the network environment. For further information, ask the system administrator or the person
in charge of the network.
If you use the stealth type wireless LAN access point which restricts automatic detection of the wireless LAN access
point, take the following procedure.
If you do not perform the procedure below, you may not be able to access the wireless LAN access point automatically
or the wireless LAN access point may not be displayed on the [Connect to a network] screen.
Click , or
A
network] - [Manually connect to a wireless network] and click [Next].
Input necessary information and add check marks for [Start this connection automatically] and [Connect even if the
B
network is not broadcasting] and click [Next].
Windows XP
Setting the profiles
Preparation
Follow the instruction manual of the wireless LAN access point to make settings for the access point to recognize the computer.
1
Slide the wireless switch to the right to turn on the wireless LAN.
2
Double-click
®
The [Intel PROSet/Wireless] screen appears.
When or
3
When you double-clicked
4
Click [Profiles...] at the lower right corner of the window, and click [Add...].
5
Enter the profile name and wireless network name (SSID), and make other necessary
changes, then click [Next].
on the notification area, click [Open Network and Sharing Center] - [Set up a new connection or
/ / on the notification area.
3
is displayed, skip step .
in step 2, slide the wireless switch to turn on.
, the wireless LAN setting is complete.
144