Panasonic Toughbook CF-C1ADAAZ6M Reference Manual page 204

Recovery Disc Creation Utility
Windows 7
You can make a recovery disc for Windows 7 Professional (32-bit or 64-bit).
The recovery disc returns the hard disk to the factory default. To create a backup of the recent state of the hard disk, refer to
Hard Disk Backup/Restore Function (
Preparation
About usable types of discs and required numbers of discs, refer to the screen.
Prepare CD/DVD drive (optional) or port replicator (optional) (refer to recent catalogs and other sources for information
about the products available)
Connect the AC adaptor and do not remove it until the operation is complete.
Close all applications except for this utility.
CAUTION
Do not perform the following operations until creating the recovery disc is complete.
• Shut down or restart Windows.
• Enter sleep or hibernation.
• Change the drive letters for the CD/DVD drive.
• Remove CD/DVD drive or port replicator. (For CF-C1 with port replicator connector)
1
<CF-C1 Series>
Turn off the computer and connect CD/DVD drive or port replicator to the computer.
2
Log on to Windows as an administrator.
3
Set a disc into the CD/DVD drive.
4
Click (Start) - [All Programs] - [Panasonic] - [Recovery Disc Creation Utility].
If [User Account Control] is displayed, click [Yes].
5
Click [Next].
6
Select OS (32-bit or 64-bit).
7
Click [Next].
8
Select the disc type.
9
Click [Next].
Following on-screen instructions, prepare the required number of disc.
10
When [Create recovery disc #1] is displayed, select [Write speed] and then click [OK].
page 201).
204