Panasonic Toughbook CF-C1ADAAZ6M Reference Manual page 208

®
Intel Active Management Technology
<Only for model with Intel
®
Intel AMT offers the operational management function and security function through network.
Setting AMT configuration
1 Turn on the computer, and press
The Setup Utility starts up.
If the password is requested, enter the Supervisor Password.
If the [Panasonic] boot screen is not displayed, turn on the computer while holding down F2 or Del. Hold down F2
or Del until the Setup Utility screen appears.
2 If the Supervisor Password is not set, select the [Security] menu, then set Supervisor
Password.
3 Select the [Security] menu, and select [AMT Configuration], and press
4 Select [Intel(R) ME Setup Prompt] and press
5 Select [Enabled] and press
6 Press .
Esc
If you do not use the Supervisor Password, clear the Supervisor Password following steps.
Select [Set Supervisor Password], and press Enter.
A
Enter the Current Password, and press Enter.
B
Press Enter when the [Create New Password] display is shown.
C
Press Enter when the [Confirm New Password] display is shown.
D
7 Press .
F10
At the confirmation message, select [Yes] and press Enter.
The computer will restart.
The following procedures are example. It is different according to your environment. Contact your technical support
office.
Shut down Windows and restart.
A
Press Ctrl + P when [Press <CTRL-P> to enter Intel(R) ME Setup or Remote Assistance] is shown after the
B
[Panasonic] boot screen disappears.
Press 1.
C
Enter "admin" in [Intel(R) ME Password], and press Enter.
D
Enter the New Password in [Intel(R) ME New Password] to change the password, and press Enter.
E
At confirmation message, enter the password, and press Enter.
Write down new password to remember you password. The password has the limitation (
®
AMT>
F2
.
Enter
or while [Panasonic] boot screen is displayed.
Del
.
Enter
208
.
Enter
page 210).