Panasonic Toughbook CF-C1ADAAZ6M Reference Manual page 93

PC Card
Windows 7
Click on the notification area and then click
A
Select the card.
B
Windows XP
Double-click
A
Follow the on-screen instructions. This step is not necessary when removing the card after turning off the
computer.
2
Remove the card.
Push the eject button.
A
Draw the card straight out.
B
<CF-C1 Series>
NOTE
Check the card's specification to prevent the total operating current from exceeding the allowable limit. Otherwise
malfunction may occur.
Allowable Current: 3.3 V: 400 mA, 5.0 V: 400 mA
After repeating insertion and removal, some types of card will not be recognized. In this case, restart the computer.
Some types of cards cannot be used simultaneously.
If the computer freezes after resuming from
the card. If the problem persists, restart the computer.
When a card is inserted, power consumption increases. Remove the card when it is not in use, especially when
operating by battery power.
To connect peripheral devices (SCSI, IEEE1394, etc.) using a PC Card, follow the steps below (one example).
Connect the peripheral device to the card.
A
Turn on the power of device.
B
Insert the card until it securely fits in the slot.
C
on the notification area and select the card.
<CF-S10 Series>
Windows 7
.
sleep/ standby or hibernation, remove and reinsert
Windows XP
93