Change Ring Tones For Specific Feature Keys - NEC DSX SUPER DISPLAY TELEPHONE User Manual

Change Ring Tones For Specific Feature Keys

To turn Feature Key ringing on and off:
(These steps apply to line keys, Call Coverage keys, and Group Call Pickup keys. See the Telephone
Feature Handbook for more on setting up Feature Keys.)
1. Do one of the following:
– For line keys, dial
– For Call Coverage keys, dial
– For Group Call Pickup keys, dial
2. Make a note of the Feature Key lamps.
– The lamps in the key type you selected will illuminate.
3. Press the line key to change to ringing. The flash rate indicates the ringing mode:
– On green for Immediate Ring.
– Slow flash green for Night Ringing (line keys only).
– Fast flash green for Delayed Ringing.
– On red for no ringing.
4. Press
SPEAKER
To change the ringing sound for individual Feature Keys:
(These steps apply to line keys, Call Coverage keys, and Group Call Pickup keys. See the Telephone
Feature Handbook for more on setting up Feature Keys.)
Menu
1. Push +
2. Do one of the following:
– For line keys, push Line.
– For Call Coverage keys, push
– For Group Call Pickup keys, push Pickup.
3. Select a Feature Key.
4. Dial one of the following to select the ring sound:
– For two mid-pitch rings (type A), dial
– For two high-pitch rings (type B), dial
– For two very high-pitch rings (type C), dial
5. Press
SPEAKER
( ).
#RAL #725
#RAC
#RAP
to exit.
Ring + Key.
Call
to exit.
( ).
#722
( ).
#727
Coverage.
.
1
.
2
.
3
11