Display And Soft Keys; Your Feature Keys - NEC DSX SUPER DISPLAY TELEPHONE User Manual

the Display and Soft Keys
Alphanumeric Display
While your phone is idle , the display shows:
G
– The date and time, your name (see page 14), and your extension number.
While your phone is ringing , the display shows:
G
– (If an Intercom call) Your caller's name.
– (If an outside call with Caller ID) The name and number of the incoming caller.
While you are on a call , the display shows:
G
– Your caller's name and number (if provided – see above).
– The functions of the soft keys that help you handle your call.
G To adjust your display , push Menu+ Display+ Contrast, ActiveBrightness,
IdleBrightness, or DialpadIlluminate. Volume adjusts the level.
Soft Keys
– Use soft keys instead of dialing feature codes when handling your calls.
Menu
Push to set up features on your phone (such as Call Forwarding).
Directory
Push to call a co-worker by selecting their name.
V-Mailxx Push to call your voice mailbox ( xx = number of new messages).
Push to review your Caller ID log ( xx = number of new calls).
Callsxx
Page
Push to Page (all zones or a single zone).
Spd Dial x
Push to access your Personal Speed Dial.
To customize your keys, see Programmable Idle Menu Soft Keys on Page 15.

Your Feature Keys

Press a line key to place or answer an outside call.
G
– Line keys flash while ringing and are on steady when busy.
– Your line key calls are green while co-worker's calls are red.
– Your line keys are normally located on the first two rows of Feature Keys.
G To make a Hotline key for a co-worker's extension:
– Dial + Press Feature Key +
#57
see HOTLINE +
HOLD
Handbook for more Feature Key types you can set up.)
G To call or Transfer your call to a co-worker:
– While on the call, press the Hotline Key. (The key lights red while your co-worker is busy, flashes red if in DND.)
– If you're not on a call, pressing the Hotline Key places an Intercom call to your co-worker.
G To check your Feature Key assignments: Press
+
HOLD INTERCOM
+ Dial co-worker's extension number +
CHECK
+ up until you
VOLUME
twice to exit. (See the Telephone Feature
+
HOLD SPEAKER
,
then the Feature Key.