CALL PARK – STEP CALL
(Version 2000 or higher software is required)
To Park a call in the first available system orbit:
You can Park Intercom or trunk calls.
Note:
1.
Press the Hold or Transfer key.
2.
Dial #6.
Note:
3.
Dial
.
*
Note:
4.
Press Speaker to hang up.
Note:
1.
Press the
2.
Press the DSS/BLF key programmed as
(The park location will be displayed in the LCD.)
3.
Press Speaker to hang up.
If you hear busy tone, the orbit is busy. Proceed to step 3.
Program 20-11-27 must be enabled in the Multiline Terminal's
Class of Service.
If not picked up, the call will recall to you.
- OR -
Hold
Transfer
or
Key.
#6
.
*
13