Holding Calls; Transferring Calls - NEC ELECTRA ELITE IPK II User Manual

HOLDING CALLS

System Hold
With a call in progress:
1. Press Hold.
Note 1:
Note 2:
Note 3:

TRANSFERRING CALLS

Using Manual Dial
With a call in progress:
1. Press the Transfer key.
2. Dial the station number.
3. Announce the call
(optional).
4. Replace the handset.
Note 1:
Note 2:
Note 3:
To retrieve a held call, press the flashing Line key or Conf key
(internal calls).
Calls on System Hold can be retrieved from any multiline
telephone with the held line appearance.
After a preprogrammed time, the held call will recall to the
originating station.
If the called station is busy, replace the handset to initiate a
camp-on. Unanswered camp-ons and unscreened transfers will
recall to the transferring station.
To return to the original party, press the flashing Line key or
Conf key.
A Programmable Function Key may be assigned for DSS.
Exclusive Hold
With a call in progress:
1. Press the Exclusive Hold
key (Service Code 751: 45).
Using Direct Station Selection
(DSS)
With a call in progress:
1. Press the Transfer key.
2. Press the programmed
DSS.
3. Announce the call
(optional).
4. Replace the handset.
10