Moving The Hard Disk Drive; Power Management Setup - NEC VERSA FX Manual

Hide thumbs Also See for VERSA FX:
Table of Contents

Advertisement

Moving the Hard Disk Drive

When a password protected HDD is moved from its original system and installed in
another system and the system is powered on, error messages appear indicating that the
drive is locked. Next, the Security Setup screen appears requiring the user to enter the
master password to unlock the drive. To unlock the drive, highlight the HDD password
line and enter the master password, when prompted.
If you wish to move an HDD from one system to another, follow steps 1 through 6 in
the section, "Establishing Hard Disk Drive Passwords," before installing the HDD in a
different system. Install the HDD in the desired system, then follow steps 7 and 8, as
desired, to establish HDD protection.
To take advantage of HDD password protection in another system, the system must be
equipped with the same HDD password protection feature. To determine if the system
has HDD password, check the System Security Setup in the BIOS setup to see if there
are provisions for establishing HDD passwords.

Power Management Setup

Your Versa FX system ships with the Windows 98 operating system that uses the
Advanced Configuration and Power Interface (ACPI) to control most power
management functions through the Power Management Properties screen in Windows.
For details about ACPI power management, see the section, "Managing System
Power," later in this chapter. The BIOS Power Management Setup screen is described
next. Please note that some of the following definitions do not apply under Windows 98
with ACPI, as noted.
Note
"Suspend" that is referenced in the BIOS Setup Utility.
Parameter
System Switch
Power Management
under AC
Power Savings Level
CPU Speed Control
Hard Disk Timeout
3-10 Using the BIOS Setup Utility
In Windows 98, the term "Standby" is functionally the same as the term
Power Management Setup
Default
Setting
Power Button
Off
Longest Life
1
50%
1
2 minutes
Alternate Setting(s)
Sleep Button
On
High Perform/Custom/Off
12.5, 25, 100%
5/30/45 sec; 1/4/6/8/10/15 min.
Off

Advertisement

Table of Contents
loading

Table of Contents