Inserting A Pc Card; Removing A Pc Card - NEC VERSA FX Manual

Inserting a PC Card

To insert a PC card, follow these steps.
1. Align the card so that the 68-pin connector points towards the slot and the arrow
shows on the top face of the card.
Slide the card into either slot. (Install Type III cards in the bottom slot, only.) A
2.
low tone followed by a high tone lets you know that the card is fully inserted and
recognized. (If you turn off the sound through the function keys or volume control,
no sound is emitted.)
Other tone sequences such as high, then low tones, indicate that the card is
inserted, but the card type is unknown.
Use the software preinstalled on your system to check PC card slot availability.
3.
Look for the PC Card icon in the Control Panel or on the right side of the taskbar.
It shows which slot contains a PC card and which is empty.

Removing a PC Card

Follow these steps to remove a PC card in Windows 98.
Double click My Computer, double click Control Panel, and double click the PC
1.
card icon or, simply double click the PC card icon from the taskbar.
Select the PC card to remove, and select Stop.
2.
The Windows operating system alerts you if any applications are still using the
card. If all applications using the card are closed, services for that card are shut
down. You receive a message saying that it is safe to remove the card.
Press the button on the side of the PC card in the slot.
3.
6-4 Communicating with Your NEC Versa
Inserting a PC Card