System Diagnostics - NEC VERSA FX Manual

6. Read the Warning screen.
A warning displays indicating that drive C: (the primary drive/partition) is about to
be erased and formatted. It may be necessary to reinstall software to the other
drives (partitions) to reestablish Start Menu links and other configuration
requirements stored on drive C:.
7. Select Continue to proceed, to perform a Partition Only restore.
If you select Back, the recovery utility returns to the prior screen which has an exit
option.
If you select Continue, a screen with progress bars displays and lets you know the
progress of the recovery.
process.
8. When the recovery process is complete, you are prompted to remove the CD from
the CD-ROM drive and reboot your system.
Press
9.
A series of hardware detection screens display, the system reboots, and the
Windows Setup screen appears. Follow the on-screen instructions to set up
Windows.
You are required to reenter your Microsoft license number.

System Diagnostics

Use the System Diagnostics option to launch the Laptop Assurance Test (LAT). The
LAT tests all system components and boot records to ensure that your system is fully
operational.
Use the Product Recovery Utility to launch the LAT as follows.
1. Check the Product Recovery CD title and make sure that it is the correct CD for
your NEC Versa computer and operating system.
Power off your system before connecting the external CD-ROM drive to your NEC
2.
Versa.
Put the CD into the CD-ROM drive tray, close the drive door, and reboot your
3.
computer.
Read the License Agreement screen that appears. Use the VersaGlide touchpad to
4.
position the cursor on the Accept button. Left click to accept the agreement.
Do not turn off or disturb the system during the recovery
, click Reboot, or press
Enter
to reboot your system.
Alt-R
Using the Operating System and Utilities 4-13