Boot Device Setup - NEC VERSA LXI - VERSION 10-2000 Manual

Automatic STF — Enables the system, after 30 minutes in Suspend mode, to save
!
the current working environment to a special file on the hard disk and to power
down the system.
Pressing the
(Windows NT, only). For more details about using this parameter, see the section,
"Managing System Power," later in this chapter. For details about creating the save-
to-file area, see the section, "HDPREPEZ Utility," in Chapter 4.
Panel Brightness — Selects the LCD screen brightness.
!
Suspend Warning Tone — Specifies whether the system warning tone sounds when
!
Suspend mode starts. It is best to keep this option enabled.
Remote Power On — Allows the serial port modem or LAN board to wake the
!
system on a ring signal.
Wake Up from Suspend Alarm/Resume Alarm Time — Allows the alarm to resume
!
the system from suspend. Designates the time parameter in five minutes increments.
(Not applicable in Windows 2000/98 with ACPI.)
Intel
!
under AC or by battery.

Boot Device Setup

Boot Device Setup allows you to define the following functions.
Parameter
Quick Boot
Silent Boot
Boot Display Device
Docking Station Video
BootUp NumLock
st
1 Boot Device
2nd Boot Device
3rd Boot Device
Fn-Power key combination also puts the system into Save to File mode
®
SpeedStep™ — Optimizes CPU performance when the system is powered
Default Setting
Enabled
Enabled
Simul. Mode
1
Dock Stn.
Auto
2
SuperDsk
2
CD/DVD
2
Floppy
Boot Device Setup
Alternate Setting(s)
Disabled
Disabled, Black
CRT only, LCD only
Portable
On, Off
Disabled/1
CD/DVD/SCSI/Network
Disabled/1
IDE/Floppy/SuperDsk
Disabled/1
CD/DVD
Using the BIOS Setup Utility 3-15
st
Fnd IDE/Floppy
st
Fnd
st
Fnd IDE/SuperDsk