Boot Device Setup - NEC VERSA FX Service And Reference Manual

Boot Device Setup

Boot Device Setup allows you to define the following functions.
Parameter
Quick Boot
Silent Boot
Boot Display Device
BootUp NumLock
st
1 Boot Device
2nd Boot Device
3rd Boot Device
Try Other Boot Devices
1
Bootable device when set to IDE hard drive. Only one IDE device is allowed to be bootable.
!
Quick Boot — Specifies whether the system performs all tests during system boot.
!
Silent Boot — Specifies whether to display the NEC logo during the system boot.
!
Boot Display Device — Specifies the display device(s) for system boot messages.
!
BootUp NumLock — Specifies whether NumLock is On or Off at system startup.
!
Boot Devices — Specifies the sequence of boot devices.
!
Try other Boot Devices — Specifies whether or not the system attempts to boot from
other devices if all selected boot devices fail to boot.
Boot Device Setup
Default Setting
Enabled
Enabled
Simul. Mode
Off
1
CDROM
1
Floppy
1 st
1 Fnd IDE
Yes
Alternate Setting(s)
Disabled
Disabled, Black
CRT only, LCD only
On
st
Disabled/1 Fnd IDE/
Floppy/Network
st
Disabled/1 Fnd IDE/
CDROM
Disabled/Floppy/CDROM
No
System Configuration and Setup 2-17